The portable helium tracer gas sniff only MD-490S is considered the Leak Detection “Work Horse” by manufacturing companies worldwide is now available in two tracer gases.
MD-490S Dual Gas is the most advanced sniffing Helium/Hydrogen leak detector designed specifically for industrial environments. The MD-490S Dual Gas utilizes VIC’s own industrial-grade mass spectrometer to achieve the highest sensitivity, fastest response-time, and smallest footprint. With a touch of a button, this dual gas unit can detect either Helium or Hydrogen tracer gases, while using a single built-in dual purpose calibrated gas leak.
MD-490S Dual Gas Features and Benefits
One Button Switch between helium and hydrogen tracer gases.
Fully Automatic Calibration sequence with built-in dual gas (helium and hydrogen mix) NIST calibrated gas leak which prompts the operator to insert probe into the built-in leak and adjusts the machine’s leak rate reading to match the leak value.
Vibra-Leak™ Probe with background suppression button provides tactile feedback when leak rate exceeds the reject set point; Ideally suited for noisy environments where audio alarms cannot be heard or where leak detectors are in close proximity; Vibra-Leak™ Probe solves background tracer gas problems during the test.
Tracer Gas Background Suppression with a push of a button; the MD-490S eliminates the tracer gas background.
Most Sensitive Sniffer Available with 10-8 sensing capabilities through enhanced tracer gas collector design and signal processing.
Fully Interactive System Diagnostics include critical parameters such as run times, operating voltages/currents and pressures.
Graphical and Numerical Displays of leak rate values.
Sealed Membrane Keypad for long life in harsh environments.
Dry (oil-free) Vacuum Pumping minimizes maintenance and potential oil-contamination problems.
Probe Blockage Alarm ensures proper system performance.
Front Panel Key Lock-Out prevents unauthorized use.
MD-490S Dual Gas is the most advanced sniffing Helium/Hydrogen leak detector designed specifically for industrial environments. The MD-490S Dual Gas utilizes VIC’s own industrial-grade mass spectrometer to achieve the highest sensitivity, fastest response-time, and smallest footprint. With a touch of a button, this dual gas unit can detect either Helium or Hydrogen tracer gases, while using a single built-in dual purpose calibrated gas leak.
A fully automatic, custom configurable evacuation and gas backfill system with built-in gross leak test that may be used to pre-charge products under test with gas for leak detection or for any gas charging application that requires evacuation and subsequent pressurization of a test product.
A fully automatic, custom configurable, multipurpose system designed to perform a pressure decay leak test, followed by a helium backfill with helium recovery.
A microprocessor-based system designed to blend two gas components, typically helium and air. These systems provide a cost effective alternative to 100% tracer gas.
Gas booster systems produce high-pressure process gas supplies from lower pressure sources, typically boosting a shop air source. Base units provide up to 600 psig pressure output. Options include higher pressure outputs and process gas drying capabilities. Can be configured for single gas or dual gas boosting.
The OM Series gas calibrator leaks utilize a precision tapered glass capillary as the leak element. Gases pass through a single orifice, with the leak rate dependent upon size and gas pressure. To prevent clogging of the fine orifice, a unique particle trap is located between the capillary tube and outlet fitting.
The PM Series – Helium based – Gas Permeation Leak Calibrators utilize a durable 7740 Pyrex glass permeation leak element which permits diffusion of helium gas.
Ideal for calibrating VIC’s TurboTest™MD-490S and halogen sniffing instruments. These leaks are specifically designed for atmospheric sniffing applications.
