x
x
Vacuum Instruments Corporation
phone
MENU

Hydrogen

Products
PRODUCTS
Ready
To Go
E-MOTT
Ideal for calibrating VIC’s TurboTest™ MD-290S, MD-390S, MD-490S and halogen sniffing instruments. These leaks are specifically designed for atmospheric sniffing applications.
Model No. E-MOTT
GB-AS
Gas booster systems produce high-pressure process gas supplies from lower pressure sources, typically boosting a shop air source. Base units provide up to 600 psig pressure output. Options include higher pressure outputs and process gas drying capabilities. Can be configured for single gas or dual gas boosting.
Model No. GB-AS
GM-BS
A microprocessor-based system designed to blend two gas components, typically helium and air.  These systems provide a cost effective alternative to 100% tracer gas.
Model No. GM-BS, Part No. 925-090
HRS
Introducing a solution to lower the cost associated with tracer gas consumption While industries strive to meet increasing demands to offer higher quality products at lower prices, the need to efficiently recycle process gas becomes apparent. Helium Recovery features a group of high efficiency gas recycling systems that significantly reduce tracer operating costs. The Helium Recovery Systems offered consists of ASME coded pressure tanks, a set of compressor(s), gas analyzer, microprocessor controls and all necessary valving, gas regulation and piping.
Model No. HRS
Ready
To Go
MD-490S DG
MD-490S Dual Gas is the most advanced sniffing Helium/Hydrogen leak detector designed specifically for industrial environments. The MD-490S Dual Gas utilizes VIC’s own industrial-grade mass spectrometer to achieve the highest sensitivity, fastest response-time, and smallest footprint.  With a touch of a button, this dual gas unit can detect either Helium or Hydrogen tracer gases, while using a single built-in dual purpose calibrated gas leak.
Model No. MD-490S DG, Part No. 966-495
MS-50GT BS
The perfect complement to our MS-50 High Speed Production Console Helium Leak Detector for in-process evacuation/backfill and leak testing.
Model No. MS-50GT BS, Part No. 0139-019-01
Ready
To Go
OM
The OM Series gas calibrator leaks utilize a precision tapered glass capillary as the leak element. Gases pass through a single orifice, with the leak rate dependent upon size and gas pressure. To prevent clogging of the fine orifice, a unique particle trap is located between the capillary tube and outlet fitting.
Model No. OM
PBS-1
Designed for bombing hermetically sealed devices in conformance with MIL- STD 883E, 750 and 202.
Model No. PBS-1, Part No. 9902-579-11
PBS-2
Designed for bombing hermetically sealed devices in conformance with MIL- STD 883E, 750 and 202.
Model No. PBS-2, Part No. 9902-579-01
Ready
To Go
PM
The PM Series – Helium based – Gas Permeation Leak Calibrators utilize a durable 7740 Pyrex glass permeation leak element which permits diffusion of helium gas.
Model No. PM
PV-883 DP
Designed for bombing hermetically sealed devices in conformance with MIL- STD 883E, 750 and 202.
Model No. PV-883 DP, Part No. 944-117
PV-883 JR
Designed for bombing hermetically sealed devices in conformance with MIL- STD 883E, 750 and 202. Ideally suited for low volume applications
Model No. PV-883 JR, Part No. 944-112
Ready
To Go
SC
Designed for MS-40, MS-50, and MS-60 leak detectors and helium leak detectors formerly made by Veeco Instruments.
Model No. SC
Ready
To Go
Smart Charge III
A fully automatic, custom configurable evacuation and gas backfill system with built-in gross leak test that may be used to pre-charge products under test with gas for leak detection or for any gas charging application that requires evacuation and subsequent pressurization of a test product.
Model No. Smart Charge III, Part No. 926-326
Smart Charge III HD
A fully automatic, custom configurable,  multipurpose system designed to perform a pressure decay leak test, followed by a helium backfill with helium recovery.
Model No. Smart Charge III HD, Part No. 926-329

Vacuum Instruments Corporation is a pioneer in providing state-of-the-art leak detection solutions for diverse applications and industries. Our systems have ensured the safety and performance of countless products that we use in our daily lives from the cars we drive to the air conditioners in our houses, the pacemakers in our bodies, and the satellites we launch into space.
LinkedIn
Vacuum Instruments Corporation, LLC
2101 Ninth Avenue, Ronkonkoma, NY 11779 USA
OFFICES   |   CONTACT US
Vacuum Instruments Corporation
2101 Ninth Avenue 11779 Ronkonkoma, NY
1-888-819-9970
1-631-737-0949
sales@vicleakdetection.com
1-888-819--9970
Legal    |    Site Map
© 2019 Vacuum Instruments Corporation, LLC.
   Back
Next
Reload