SMART CHARGE 5
TRACER GAS CHARGING SYSTEM
The Smart Charge 5 is a fully automatic, custom configurable evacuation and tracer gas backfill system with built-in gross leak test. The system is ideally suited for pre-charging of product with tracer gas, such as Helium, Hydrogen or others prior to the leak test processes. It can also be used with any gas charging application that requires evacuation and subsequent pressurization of a test product.
Main Features
- 7” user-friendly display TC
- Portable
- Data logging
- Digital part pressure with 3 selectable units
- Password Protection prevents unauthorized access
- Flexibility for up to 50 recipes
- Full automatic cycling
- 2 inputs; 2 outputs available for external use, such as
for future clamping, etc.
Performance
- Base unit performs evacuation (25″ Hg),vacuum decay test and tracer gas backfill to 300 psig. Units can be configured to perform evacuation to lower vacuum levels.
Options
- Analog
- MD-490S paired operation
- User I/O
- Printer
- Low pressure feature, 0-20 psig
- Nitrogen charge up to 700 psig
- Barcode scanner feature
TECHNICAL SPECIFICATIONS |
---|
Power | Universal voltage 110 vac or 220-Volt AC, 50 – 60 Hz, 6.5 Amps nominal |
---|---|
Dimensions (WxHxD) |
(WxHxD) |
Utility Fittings |
1⁄4” NPT female |
Pressure Transducer | Resolution of 0.01 psi in vacuum mode, or in pressure mode. Accuracy of ± 0.25%. |
Valving | Fast acting pull type solenoid featuring epoxy encapsulated design |
Manifolding | Seamless tubing with compression fitting interconnects. Helium leak tested to 1.0 × 10-6 atm-cc/sec@600 psig |
Product Evacuation Pump | Air Driven Venturi Pump Providing ultimate vacuum level 25.5″ Hg |
Product Evacuation Pump | Air Driven Venturi Pump Providing ultimate vacuum level 25.5″ Hg |
Gauging | Digital part pressure and leak rate displayed on operator interface |
Electronics | Microprocessor-based programmable logic controller |