Test setup featuring MPS and MD490 devices

MULTI-POINT SNIFFER (MPS)

SIMULTANEOUS LEAK DETECTION FROM UP TO 10 LOCATIONS

The Multi-point Sniffer is an accessory to the MD-490S that allows the unit to sniff multiple points simultaneously and give a pass/fail of the part based on a user settable leak rate. If a part fails, the unit will sniff each line individually and give feedback as to which points are leaking.

APPLICATION

AUTOMOTIVE
- Exhaust System
- Cooling Circuit
- Engine
- Battery
- Oil Pan

AIR CONDITIONING
- Condenser Coils
- Evaporator Coils
- Compressor Seals
- Refrigerant Tubing
- Valve and Joint

MEDICAL
- IV Bag
- Implantable Device
- Syringe and Vial
- Medical Pouch
- Packaging

AEROSPACE
- Fuel System
- Hydraulic System
- Oxygen System
- Pressurized Cabin
- Cooling System

FEATURES

GENERAL
- Cumulative leak test on 10 leak sites simultaneously using one 490MPS.
- If the cumulative test exceeds the programmed allowable reject limit the unit can automatically initiate a leak ID on each of the 10 test sites and provide quantified test result with pass/fail.
- MMI adjustable test parameters
- Select between English & Spanish
- Data logging capable
- Remote I/O for: Cycle start, Cycle in progress, Accept or Reject
- Ideal for Multi-port clamshell application for sniffing.
- 5-year electronics warranty
- Light weight portable design
- Lowest Ownership cost

MODULES

Main Power	110 VAC, 0.5 Amps
AUX Output	Accept, Reject, Cycle in Progress
AUX Start	Remote Start & Stop Control
Ethernet Port	Future Expansion
Spare RS 232	Future Expansion
MD490S Communication	Connects to the MD490S
Sniffer Ports	10 Available Sniffer Ports
Calibration Port	Used to Calibrate the MPS Modules

DOCUMENTATION

DATASHEETS

Datasheet (English)

USER MANUAL

📑 User Manuals (Request Access)