PV883 JUNIOR
GAS HANDLING SYSTEM – BOMBING STATION
IDEAL FOR LOW VOLUME APPLICATIONS
Introducing the VIC PV883 Junior Bombing Station, designed for helium and tracer gas leak detection in low-volume applications. Perfect for automotive, aerospace, and electronics industries, this compact version offers precise and efficient testing. The PV883 Junior ensures reliable identification of small leaks, making it ideal for quality assurance in smaller-scale operations.
The purpose of the PV-833 Junior bombing station is to “bomb” hermetically sealed components prior to leak testing. The ‘Helium Bomb” technique of leak testing is a method of testing components that have been sealed with no helium tracer gas inside. In order to introduce helium into the device, it is placed in a container and externally pressurized with helium at pressures varying typically from 2 atm to 5 atm and for periods from 1 to 10 hours. If a leakage path exists, helium will enter the component through the leak and it may then be tested on a Helium Mass Spectrometer Leak Detector.
Main Features
- Ideally suited for low volume applications
- Chamber 5” dia x 3” depth or 9.5” dia x 3” depth with integral manifold
block and all necessary valving - 2.0 CFM Direct Drive pump with coaxial trap
- Mounts to table top
Operation
- Initial Startup
- Loading of Canister
- Evacuation of Canister
- Pressurization with Helium
- Bombing Period
- Venting of Canister
- Flushing the Devices
- Shutdown of Bombing Station
The PV883 Junior Bombing Station can be fully customized to meet your testing requirements.
SPECIFICATIONS |
---|
Chamber Size | 5” Diameter x 3” deep chamber or 9.5” Diameter x 9.5” deep |
---|---|
Maximum Operating Pressure | 100 psi |
Pump | 2.0 CFM direct drive mechanical pump with coaxial trap |
Operation | Controls provide initial evacuation, venting after bombing and purging of the chamber with Nitrogen and other gases |
Valves | Manual helium, evacuation, N2 purge and vent |
Safety | 100 psi pressure relief valves |
Dimensions | 5” Diameter x 3” deep; 9.5” Diameter x 9.5” deep |
Shipping Weight | 100 lbs |
Power Requirements | – |
Other | De-Staco chamber lid hold-down clamps. integral valve block manifold, mounts to table top |